Aeolus Series R410A Wall Split Inverter, 24,000 BTU
The Aeolus R410A inverter wall split at 24,000 BTU is the larger Aeolus room unit, pairing inverter drive with a listed model number and rated efficiency ratios, for rooms that need substantially more capacity than the 9,000 BTU fixed-frequency model.
Illustrative diagram. Capacity figures are taken from the specification table on this page.
Figures on this page are listed figures. Confirm any flagged figure before ordering.
What this model is
The listed cooling capacity is 24,000 BTU and the listed heating capacity is 24,500 BTU, both at T1 rating conditions. Inverter drive means the compressor speed varies with demand, which suits larger rooms where the load changes through the day — a living room that is empty at midday and full in the evening, for example. The listed EER for cooling is 3.15 watts per watt and the listed COP for heating is 3.18 watts per watt. Those ratios sit close to the smaller fixed-frequency Aeolus model, and the comparison is instructive: the inverter model's case rests on part-load behaviour and comfort steadiness, not on a dramatically higher rated ratio. A buyer who only compares rated ratios will miss the reason to choose inverter, and a buyer who only repeats the word inverter will miss the need to check the rated figures at all.
Control is listed as remote control as standard with smart app control as optional, the same control pattern as the smaller Aeolus model. Filtration is listed as top-opened, high density filters, and the heat exchanger carries the golden anticorrosive description. The warranty row differs from the smaller model: 24 months for units and five years for the compressor, against 36 months and six years for the 9,000 BTU model. That contrast is a reminder to check warranty rows model by model rather than assuming a series warranty. The model number KWSM-24R410AHFAE is the identifier to quote, because the Aeolus series also contains a fixed-frequency model and a floor standing model, and neither capacity nor series name alone identifies this unit.
Specifications as listed
| Model | KWSM-24R410AHFAE |
|---|---|
| Rated cooling capacity (T1) | 24000 Btu |
| Rated heating capacity | 24500 Btu |
| Type | Wall Split Type Inverter 50Hz |
| Power supply | 220v-240V 50Hz |
| Control | Remote (Standard) / Smart App (Optional) |
| Filter | Top-Opened Filters, High Density Filters |
| Heat exchangers | Golden Anticorrosive Technology |
| Warranty | 24 months for units / 5 years for compressor |
| EER cooling | 3.15 W/W |
| COP heating | 3.18 W/W |
Where this model fits
This model suits larger rooms and open-plan living spaces on a 220–240 V, 50 Hz supply, where inverter steadiness matters and where the buyer wants both cooling and heating from one wall unit. It pairs naturally with the smaller Aeolus model in a distributor's range: the two models share a series and a refrigerant, but differ in drive, capacity and warranty row, so a distributor can offer a small-room and a large-room answer without changing series. Buyers in 60 Hz markets need a different model.
What to confirm in your inquiry
Before placing an inquiry, list the following so the model can be matched without repeated rounds of questions: required capacity, power supply voltage and frequency at the installation site, control preference (remote control or smart app control where listed), quantity per capacity, destination market, and any certification documents you need for import. State whether you need a sample first, and state the delivery window you are working toward. Certificates are available upon request, so ask for the exact documents your market requires rather than assuming a certificate covers a shipment.
- Capacity and quantity per capacity
- Voltage and frequency at the installation site
- Control preference where the listing offers a choice
- Destination market and certification documents needed
- Sample requirement and target delivery window
Attribution note. Brand and product descriptions on this page follow the Kanion Co brand presentation. Where a fact comes from the company profile, it is stated as such. Production and group facts are presented under Kanion Group attribution, not as the capacity of a single company unit. Certificates available upon request.