Deluxe Series R290 Monobloc Air to Water Heat Pump, Three-Phase
The Deluxe Series R290 monobloc heat pump for three-phase supply covers 12 kW and 16 kW, for larger homes and small commercial buildings where a single-phase supply cannot carry the heating load.
Illustrative diagram. Capacity figures are taken from the specification table on this page.
Figures on this page are listed figures. Confirm any flagged figure before ordering.
What this model is
The model range is listed as KATWHP-12KWR290M3N to KATWHP-16KWR290M3N, and the power supply is listed as 380–415 V, three-phase, 50 Hz. The two capacity steps — 12 kW and 16 kW — are the top end of the Deluxe monobloc range, and the three-phase supply is what makes those steps practical: a 16 kW heating load on a single-phase domestic supply would strain the supply in many buildings, so the three-phase listing is not a minor detail but the condition that makes the larger steps usable. A buyer should therefore confirm the building's supply type before choosing between the single-phase and three-phase Deluxe pages, because the two pages share a refrigerant and a monobloc layout but differ in the supply they require.
As with the single-phase Deluxe monobloc, the refrigerant is R290 and the system type is monobloc air to water, with water as the only medium travelling indoors. No coefficient of performance, water temperature or flow figure is listed for this model, and none is promised here. The buyer conversation for this model is therefore about load and supply first: what is the building's heat load, is three-phase power available, and what water distribution — radiators, underfloor circuits, or both — will the heat pump serve. Those three answers, together with the destination market and certification needs, are enough for a first reply to confirm whether the 12 kW or the 16 kW step matches. The Deluxe series ordering terms in the guides — starting quantity per capacity and sample availability — apply here as they do to the single-phase model, and the per-capacity quantity should be confirmed for the exact step ordered.
Specifications as listed
| Model | KATWHP-12KWR290M3N–KATWHP-16KWR290M3N |
|---|---|
| Power supply | 380-415V~ 3N-50Hz |
| Refrigerant | R290 |
| System type | Monobloc air to water heat pump, three-phase |
Where this model fits
This three-phase monobloc suits larger homes and small commercial buildings with a 380–415 V three-phase supply and a water-based heating distribution. It is the natural step up from the single-phase Deluxe monobloc when the heat load exceeds what a single-phase supply can carry comfortably. Buyers on a single-phase supply, or buyers who need a split layout with an indoor hydraulic unit, should choose a different heat pump page.
What to confirm in your inquiry
Before placing an inquiry, list the following so the model can be matched without repeated rounds of questions: required capacity, power supply voltage and frequency at the installation site, control preference (remote control or smart app control where listed), quantity per capacity, destination market, and any certification documents you need for import. State whether you need a sample first, and state the delivery window you are working toward. Certificates are available upon request, so ask for the exact documents your market requires rather than assuming a certificate covers a shipment.
- Capacity and quantity per capacity
- Voltage and frequency at the installation site
- Control preference where the listing offers a choice
- Destination market and certification documents needed
- Sample requirement and target delivery window
Attribution note. Brand and product descriptions on this page follow the Kanion Co brand presentation. Where a fact comes from the company profile, it is stated as such. Production and group facts are presented under Kanion Group attribution, not as the capacity of a single company unit. Certificates available upon request.