Hybrid Solar Air Conditioner
The hybrid solar air conditioner combines solar input with mains supply, with capacities from 12,000 BTU to 24,000 BTU and a listed supply range that spans both solar and mains voltages.
Illustrative diagram. Capacity figures are taken from the specification table on this page.
Figures on this page are listed figures. Confirm any flagged figure before ordering.
What this model is
The capacity steps are 12,000, 18,000 and 24,000 BTU — three steps, not four, because the hybrid listing starts at 12,000 BTU rather than 9,000 BTU. A buyer who needs a 9,000 BTU solar unit should therefore look at the off-grid model, not assume the hybrid model covers that step. The power supply is listed as 208–240 V with an 80–380 V range, which is the hybrid story in one line: the unit works with mains supply in the 208–240 V band and accepts a wide solar input range up to 380 V. That wide range is what lets solar assist without carrying the whole load, and it is also why the buyer must describe their solar arrangement in the inquiry — panel voltage, whether a battery is involved, and the mains voltage at the site — rather than ordering on capacity alone.
Control is listed as remote control as standard together with smart app control, filtration as high density filter with reinforced construction, and the heat exchanger with the golden anticorrosive description. The warranty row is 24 months for units and five years for the compressor, matching the off-grid model. The drive is listed as 3D DC inverter. As with the off-grid model, no generation figure, saving percentage or payback period is listed, and none is promised here, because those figures depend on the solar setup, the climate and the room load together. The comparison a buyer should make between the two solar models is therefore not about headline efficiency but about supply: grid available or not, DC system in place or not, and 9,000 BTU needed or not. Those three answers pick the model.
Specifications as listed
| Capacity | 12000 / 18000 / 24000 Btu |
|---|---|
| Type | 3D DC Inverter, 208V – 240V, Hybrid Solar Air Conditioner |
| Power supply | 208V – 240V, 80-380V |
| Control | Remote (Standard) and Smart App Controller |
| Filter | HD Filter, Reinforced high density filter |
| Heat exchangers | Golden Anticorrosive Technology |
| Warranty | 24 months for units / 5 years for compressor |
Where this model fits
This model suits homes and small commercial buildings with grid power available, where solar input should assist cooling and reduce grid draw without replacing the grid connection. It suits buyers who already have, or plan, a solar array in the listed voltage range. Buyers without any grid connection should choose the off-grid DC48V model instead, and buyers who need a 9,000 BTU step should also look at the off-grid model.
What to confirm in your inquiry
Before placing an inquiry, list the following so the model can be matched without repeated rounds of questions: required capacity, power supply voltage and frequency at the installation site, control preference (remote control or smart app control where listed), quantity per capacity, destination market, and any certification documents you need for import. State whether you need a sample first, and state the delivery window you are working toward. Certificates are available upon request, so ask for the exact documents your market requires rather than assuming a certificate covers a shipment.
- Capacity and quantity per capacity
- Voltage and frequency at the installation site
- Control preference where the listing offers a choice
- Destination market and certification documents needed
- Sample requirement and target delivery window
Attribution note. Brand and product descriptions on this page follow the Kanion Co brand presentation. Where a fact comes from the company profile, it is stated as such. Production and group facts are presented under Kanion Group attribution, not as the capacity of a single company unit. Certificates available upon request.