Aeolus Series Floor Standing Air Conditioner, 60,000 BTU
The Aeolus floor standing air conditioner is the large single-room unit of the range, rated at 60,000 BTU cooling and 65,000 BTU heating, on a three-phase supply, with listed noise figures and a listed model number.
Illustrative diagram. Capacity figures are taken from the specification table on this page.
Figures on this page are listed figures. Confirm any flagged figure before ordering.
What this model is
The rated cooling capacity is 60,000 BTU and the rated heating capacity is 65,000 BTU, both at T1 conditions, which places this unit well above every wall split in the range — the largest wall split step is 30,000 BTU. That gap is the point: a floor standing unit of this size serves a hall, a large open-plan room or a small commercial space as a single unit, where several wall splits would otherwise be needed. The power input is listed as 5,582 watts for cooling and 5,916 watts for heating, and the listed EER for cooling is 3.15 watts per watt with a COP for heating of 3.22 watts per watt. Those figures let a buyer check the electrical load and the rated efficiency without any additional claim, and they also confirm the supply requirement: a unit drawing over five kilowatts needs the three-phase supply it lists, not a standard single-phase room circuit.
The power supply is listed as 380–415 V, three-phase, 50 Hz, and the climate type is listed as T1. Noise is listed as 52 dB(A) indoors and 60 dB(A) outdoors — figures that matter for a floor standing unit precisely because it sits in the room rather than on a high wall, so its indoor sound is closer to the occupants. The warranty row is 36 months for units and six years for the compressor, matching the longer warranty rows in the range rather than the 24-month rows. The model number KFS-60IR410AHFAE is the identifier to quote, because the Aeolus series also contains wall splits and a heat pump, and a series name alone does not identify this unit. No other floor standing model carries listed parameters on this site, so this page is the only floor standing specification table in the range.
Specifications as listed
| Model | KFS-60IR410AHFAE |
|---|---|
| Rated cooling capacity (T1) | 60000 Btu |
| Rated heating capacity | 65000 Btu |
| Type | Inverter Cooling and Heating Floor standing Type |
| Power supply | 380-415/3/50Hz |
| Warranty | 36 months for units / 6 years for compressor |
| EER cooling | 3.15 W/W |
| COP heating | 3.22 W/W |
| Indoor noise | 52 dB(A) |
| Outdoor noise | 60 dB(A) |
| Climate type | T1 |
| Power input | Cooling 5582 W / Heating 5916 W |
Where this model fits
This model suits large rooms, halls and small commercial spaces with a 380–415 V three-phase supply, where a single floor standing unit is preferable to several wall splits. It also suits rooms where wall space is unavailable for a wall unit, since it takes floor space instead. Buyers without three-phase power, and buyers whose room needs less than half this capacity, should choose a wall split model rather than oversizing with this unit.
What to confirm in your inquiry
Before placing an inquiry, list the following so the model can be matched without repeated rounds of questions: required capacity, power supply voltage and frequency at the installation site, control preference (remote control or smart app control where listed), quantity per capacity, destination market, and any certification documents you need for import. State whether you need a sample first, and state the delivery window you are working toward. Certificates are available upon request, so ask for the exact documents your market requires rather than assuming a certificate covers a shipment.
- Capacity and quantity per capacity
- Voltage and frequency at the installation site
- Control preference where the listing offers a choice
- Destination market and certification documents needed
- Sample requirement and target delivery window
Attribution note. Brand and product descriptions on this page follow the Kanion Co brand presentation. Where a fact comes from the company profile, it is stated as such. Production and group facts are presented under Kanion Group attribution, not as the capacity of a single company unit. Certificates available upon request.